With high-quality products, preferential prices, fast construction period, and thoughtful after-sales service, the company wholeheartedly serves every customer and has won unanimous praise from customers. The quality control requirements of "careful material selection, careful mold making, and careful injection molding" are refined into the operating standards of each process, and the production and inspection are organized in strict accordance with the standards and customer requirements in the entire production process, and the product quality is realized through technological innovation. keep improve.

Paint Bucket Mold/Huangyan Paint Bucket Mold/Zhejiang Paint Bucket Mold Supplier

2. Plastic bucket molds (including plastic food bucket molds, chemical bucket molds, paint bucket molds, anti-theft lid plastic bucket molds, bucket molds, water bucket molds, packaging bucket molds, etc.). Commonly used mold steels are: 45#, 40Cr, P20, 2738, 2316, 718, NAK80, S136 and so on. It is generally recommended to use 718 and Shanghai Baosteel P20 materials for plastic barrel molds (because 718 and Shanghai Baosteel P20 can not only improve the life of the mold through our company's mold manufacturing process, but also increase the surface gloss of the products injected by the mold, and at the same time not Flashing/burring will occur.)

3. Mold Design A good mold structure design is the prerequisite for a qualified mold manufacturing. The technical department of our company has 10 professional mold structure designers and product stylists, all of whom have more than 5 years of work experience. Analyze the product structure in all aspects (including: mold demoulding slope, product surface miniature, gating system design, exhaust system design, cooling system design, etc.) Do trial and error.

4. Company Equipment Shiying Mold Company has a full set of processing equipment, including 8 sets of CNC milling (one of which is high-speed milling, the precision can reach 0.1mm), 3 sets of EDM can reach 0.1mm, 4 sets of Jingdiao (one of which is oblique degree carving), 3 large drilling machines, 4 wire cutting machines, a surface grinder that can reach 0.02mm, and a milling machine.

5. Mold cooling system design The design of the cooling system is a relatively complicated work, that is, the cooling effect and uniformity of cooling must be considered, and the influence of the cooling system on the overall structure of the mold must be considered. The specific location and size of the cooling system must be determined ; Cooling of key parts such as moving molds or inserts; cooling of side sliders and side cores; design of cooling components and selection of cooling standard components. Our company began to analyze these series of problems when designing the mold. The mold adopts the method of circulating water to flow in every part of the mold, which reduces the cooling time during injection molding, improves the production efficiency of the product, and greatly reduces the production cost.

6. Mold maintenance Mold maintenance is more important than mold maintenance. The more times the mold is repaired, the shorter its life; and the better the mold is maintained, the longer its service life will be. Mold maintenance is mainly divided into three points; 1. Daily maintenance of the mold: various moving parts such as thimbles, row positions, guide posts, and guide bushes are refueled, the mold surface is cleaned, and the water is dredged. This is the daily maintenance of the mold during production. 2. Regular maintenance: Regular maintenance includes cleaning of exhaust grooves, exhausting of trapped air and black spots, correction of damaged and worn parts, etc. in addition to daily maintenance. 3. Appearance maintenance: Paint the outside of the mold base to avoid rust. When the mold is lowered, the fixed mold and the movable mold should be coated with anti-rust oil. The mold should be closed tightly during storage to prevent dust from entering the cavity.

  Guangya Mold Company has passed the ISO9001:2000 international quality system certification! The technical requirements are as follows:

1. Analyze the product molding process, mold structure and manufacturing process. Guaranteed mold life up to 1 million times or more.

2. It is necessary to design a complete mold structure and processing parts, and put forward assembly requirements and injection molding process requirements.

3. Cause appearance quality defects of plastic parts (such as shrinkage, etc.) or mold structure problems (such as parting surface setting, gate setting, mold life cannot be guaranteed, etc.).

4. Mold Appearance: The appearance of the mold must ensure no rust, no impact marks, no defective parts and other module defects.

5. Mold transportation: The mold must be transported with clamping pieces, and the packaging is strong and rust-proof.

Guangya's integrity, strength and product quality have been recognized by the industry. Welcome friends from all walks of life to visit, guide and negotiate business.

Plastic barrel mould, undertake the shape design of plastic barrels, the quality is excellent, and the mold only earns processing fees.